$114.36
Aqua-Flo XP2e 3HP 56f Wet End Assembly
Genuine complete replacement 56 Frame Aqua-flo XP2e wet end with 3hp rated internal impeller and designed specifically for use with Hot Tubs and Spas. This XP2e wet end only fits older discontinued 56 Frame (6.1″) pump motors.
The best way to identify an Aqua-flo 56 frame wet end model regardless of its impeller size is they have a part number of 92770715 stamped into one of the four support legs on the rear of the wet end.
- Plumbing connections: 2 inch unions.
- Wet End Frame Size – 56
- Wet End Type – Side Discharge
- Wet End Horsepower: 3HP
- Length: 200 mm Height: 185 mm Width: 140mm
- Commonly used with: This wet end can be found on Aqua-flo pumps with old EMG motors fitted to Tiger River Spas and Hotspring Spas.
$31.00
Aqua-Flo XP2e CE Pump Impeller 1.5hp
Genuine replacement 1.5hp impeller for the European Aqua-flo XP2e CE pump wet ends designed specifically for use with Hot Tubs & Spas. These 1.5hp impellers will only fit the new blue XP2e pump wet ends and you should fit the same horsepower equivalent. The horsepower rating is determined by the Vein Gap Distance.
- Impeller HP – 1.5hp & 2hp @ 60Hz
- Vein Gap Distance – 10mm
- Intake Outer Diameter – 66mm
- Diameter – 102mm
- Length – 83mm
- Colour Dot ID – Blue/Silver
$32.00
Aqua-Flo XP2e CE Pump Impeller 2hp
Genuine replacement 2hp impeller for the European Aqua-flo XP2e CE pump wet ends designed specifically for use with Hot Tubs & Spas. These 2hp impellers will only fit the 6.1 wet ends and the new blue CE XP2e pump wet ends and you should fit the same horsepower equivalent. The horsepower rating is determined by the Vein Gap Distance.
- Impeller HP -2hp 50hz & 3hp @ 60Hz
- Vein Gap Distance – 13mm
- Intake Outer Diameter – 60mm
- Diameter – 115mm
- Length – 83mm
- Colour Dot ID – Silver/Silver
$32.00
Aqua-Flo XP2e CE Pump Impeller 3hp
Genuine replacement 3hp impeller for the Aqua-flo Flomaster XP2 pump wet ends designed specifically for use with Hot Tubs & Spas. These 3hp impellers are the most common in Europe and will ONLY fit the XP2 pump wet ends, you should always fit the same horsepower equivalent. The horsepower rating can be identified by the vein gap distance.
- Impeller HP – 3hp @ 60Hz
- Vein Gap Distance – 11mm
- Intake Outer Diameter – 53mm
- Diameter – 110mm
- Length – 80mm
- Colour Dot ID – Green/Green
$28.82
Aqua-Flo XP2e Flomaster Impeller 2.5hp
Genuine replacement 2.5hp impeller for the modern Aqua-flo Flomaster XP2e pump wet ends designed specifically for use with Hot Tubs & Spas. These 2.5hp impellers will ONLY fit the modern XP2e pump wet ends and you should always fit the same horsepower equivalent. The horsepower rating can be identified by the vein gap distance.
- Impeller HP -2.5hp
- Vein Gap Distance – 11mm
- Intake Outer Diameter – 60mm
- Diameter – 102mm
- Length – 83mm
- Colour Dot ID – Silver/White
$10.00
Aquaspa (SC803) Hot Tub Filters For Inflatable Tubs
| Attribute | Value |
| Filter Length (cm) | 9 |
| Filter Diameter (cm) | 10 |
| Filter Top Cap | Closed |
| Filter Bottom Cap | 5.7cm Female Fine Thread |
Always compare the dimensions of your filter against the dimensions shown above
To Fit Spa Brands:
- All Seasons
- Aqua Spa
- Aquaparx
- B Cool 2
- Clever Spas
- Costway
- Cosy spa
- Costway
- G spa
- Ozpazia Spas
- Wave Spas
$17.59
WE’VE UPGRADED THIS PRODUCT! CLICK HERE
AquaSparkle Bromine Granules 1Kg
Spa Bromine Granules are used for controlling bacteria in spa water.They are highly effective granules used for sanitation and algae control of spa water. The granules are relatively PH neutral.
This can be used in hot tubs as a Bromine-based shock treatment, simply shock, then let flush through the system.
- Bromine Infused Granules
- Used either as your daily dose or as a shock alongside bromine tablets
- Relatively PH Neutral vs other sanitisers.
- Comes in a 1kg or 5kg tub
$24.98
WE’VE UPGRADED THIS PRODUCT: CLICK HERE
Aquasparkle Bromine Tablets 1kg
- Popular alternative to chlorine sanitisers
- Comes in 20g Tablets
- Bromine is used in a dispenser or dosing system
$7.94
WE’VE UPGRADED THIS PRODUCT! CLICK HERE
AquaSPArkle Spa Hardness Plus 1KG
AquaSPArkle Spa Hardness Plus increases the calcium hardness of hot tub water.
$19.99
AquaSparkle Hot Tub Starter Kit, is great value providing everything you need so you can relax in your Hot Tub.
The Kit includes:
500g AquaSparkle Stabilised Bromine Granules
500g AquaSparkle pH Plus
500g AquaSparkle pH Minus
500ml AquaSparkle FoamAway
1 pack of 25 3 in 1 test strips.
$7.00
AquaSparkle Immerse Cartridge Cleaner Sachets
AquaSPArkle Immerse is a top quality powdered filter cleaner that removes oils, grease, rust and, particularly, scale from hot tub filter cartridges.
Immerse is a rapidly soluble formula that may be used in a Filter Soak Container or the dishwasher.
- Quickly removes the grease and oils that build up on the filter cartridge
- Use on a monthly basis
- Available in twin packs or 6 or 10 packs. Order more save more!
- One sachet treats up to 4 gallons of water
$12.20
AquaSparkle Multifunctional Chlorine Tablets 1kg – Slow-Release Sanitiser for Hot Tubs & Pools
$6.97
AquaSparkle pH Minus (1.5kg) lowers high pH levels in hot tubs and pools. Helps prevent cloudy water, scale, and irritation. Fast-dissolving granules.
$6.97
WE’VE UPGRADED THIS PRODUCT! CLICK HERE
AquaSparkle pH Plus1KG
AquaSPArkle pH Plus is a granular product used to increase the pH of hot tub water.
Problems caused by low pH include skin and eye irritation, corrosion of pumps and heater elements, pitting and etching on acrylic surfaces.
$11.51
AquaSparkle ScaleAway 1Ltr
- High Quality De-scaler for Hot Tubs.
- Controls and removes scale (and stains) in your spa.
- For a 1,000 Litre Spa, add 25ml as an initial dose and then a weekly top-up dose of 15ml.
- Add directly to your spa water.
$10.00
WE’VE UPGRADED THIS PRODUCT: CLICK HERE
AquaSparkle Spa Sparkle 1Ltr
- Makes spa water look crystal clear
- Add directly to the spa water with the pump running
- Compatible with all types of filtration systems
