- HomeProducts tagged “Wet end”
$100.69
Aqua-Flo Circ-Master CP Wet Ends 48FR (1.5″x1.5″)
Complete replacement 48 Frame Aqua-flo Circ-Master CMCP circulation pump wet end with 1/15hp rated internal impeller, designed specifically for use with Hot Tubs and Spas. This is for the less common Circ-Master CP Pump (Centre Discharge) usually with an Emerson Motor.
- Plumbing connections: 1.5 inch unions.
- Wet End Frame Size – 48
- Wet End Type – Centre Discharge
- Wet End Horsepower: 1.5 HP
- Length: 185 mm Height: 170 mm Width: 140mm
- Commonly used with: This is for the less common Circ-Master CP Pump (Centre Discharge) usually with an Emerson Motor.
$100.69
Aqua-Flo Circ-Master HP Wet End 48FR
Complete replacement 48 Frame Aqua-flo Circ-Master HP circulation pump wet end rated at 1/15hp, designed specifically for use with Hot Tubs and Spas. This is for the very common Circ-Master HP Pump (Side Discharge) fitted usually with an Emerson Motor.
- Plumbing connections: 1.5 inch unions.
- Wet End Frame Size – 48
- Wet End Type – Side Discharge
- Wet End Horsepower: 1.5HP
- Length: 205 mm Height: 170 mm Width: 145mm
- Commonly used with: This is for the very common Circ-Master HP Pump (Side Discharge) fitted usually with an Emerson Motor..
$100.69
Aqua-Flo Circ-Master XP Wet End 48FR
Complete replacement 48 Frame Aqua-flo Circ-Master XP circulation pump wet end with 2hp rated internal impeller, designed specifically for use with Hot Tubs and Spas. This is for the uprated Circ-Master XP with US Motor & XP2e wet end commonly found on Sundance Spas & Jacuzzi Hot Tubs.
- Plumbing connections: 2 inch unions.
- Wet End Frame Size – 48
- Wet End Type – Side Discharge
- Wet End Horsepower: 2HP
- Length: 285 mm Height: 185 mm Width: 140mm
- Commonly used with: This is for the uprated Circ-Master XP with US Motor & XP2e wet end commonly found on Sundance Spas & Jacuzzi Hot Tubs.
$90.71
Aqua-Flo CMCP Wet End Assembly
Complete replacement Aqua-Flo CMCP Wet End Assembly, designed specifically for use with Hot Tubs and Spas. This is for the uprated Circ-Master XP with US Motor & XP2e wet end commonly found on Sundance Spas & Jacuzzi Hot Tubs.
- Plumbing connections: 1.5 inch unions.
- Wet End Frame Size – 48
- Wet End Type – Centre Discharge
- Length: 205 mm Height: 170mm Width: 143mm
- Commonly used with:This is the Gecko / Aquaflo factory original wet end which is usually fitted to a Emerson motor, the wet end sometimes has a code on 91040840.
$114.01
Aqua-Flo CMHP Wet End Assembly
Complete replacement Aqua-Flo CMHP Wet End Assembly, designed specifically for use with Hot Tubs and Spas. This Hi-flo 1HP rated side discharge wet end is the correct replacement for Aqua-flo’s 1/15hp Circmaster circulation pump. The side discharge model is the most common sold in europe.
- Plumbing connections: 1.5 inch unions.
- Wet End Frame Size – 48
- Wet End Type – Centre Discharge
- Wet End Horsepower: 1HP
- Length: 205 mm Height: 170 mm Width: 143mm
- Commonly used with: Aqua-flo Flo-Master CP centre discharge hot tub pump range. Fits 1 ½” unions. This is also an ideal replacement wet end for the Waterway centre discharge pump.
$103.73
Aqua-Flo XP2 2HP* 56f (6.1 inch Euro Legs) Wet End Assembly (2×2)
Complete replacement Aqua-Flo CMHP Wet End Assembly, designed specifically for use with Hot Tubs and Spas. This Hi-flo 2HP rated side discharge wet end is the correct replacement for Aqua-flo’s Flo-Master XP2e and XP2 Pump.
This complete Aqua-Flo XP2 2HP is specific to the XP2 Circ pump used on Emerson motors.
- Plumbing connections: 2 inch unions.
- Wet End Frame Size – 56
- Wet End Type – Side Discharge
- Wet End Horsepower: 2HP
- Length: 200 mm Height: 185 mm (main face diameter not screw holes) Width: 140mm
- Commonly used with: XP2 Circ pump used on Emerson motors.
$103.73
Gecko XP2e Wet End 2.5HP* 56f (6.1″ Euro Legs) Wet End Assembly (2×2)
Genuine replacement 56 Frame (6.1″) Aqua-flo XP2e wet end with 2.5hp rated internal impeller and designed specifically for use with Hot Tubs and Spas. This XP2e wet end only fits older discontinued 56 Frame (6.1″) pump motors.
- Plumbing connections: 2 inch unions.
- Wet End Frame Size – 56 Frame (6.1″)
- Wet End Type – Side Discharge
- Wet End Horsepower: 2.5HP
- Length: 285 mm Height: 185 mm (main face diameter not screw holes) Width: 140mm
- Commonly used with: This wet end can be found on Aqua-flo pumps with old EMG motors fitted to Tiger River Spas and Hotspring Spas.
$114.36
Aqua-Flo XP2e 3HP 48f Wet End Assembly
Genuine complete replacement 48 Frame Aqua-flo XP2e wet end with 3hp rated internal impeller and designed specifically for use with Hot Tubs and Spas. This 3hp XP2e wet end fits all 48 frame sized Aqua-flo pumps/motors.
The best way to identify an Aqua-flo 48 frame wet end model regardless of its impeller size is they have a part number of 92770705 stamped into one of the four support legs on the rear of the wet end.
- Plumbing connections: 2 inch unions.
- Wet End Frame Size – 48
- Wet End Type – Side Discharge
- Wet End Horsepower: 3HP
- Length: 285 mm Height: 185 mm Width: 140mm
- Commonly used with: This exact wet end can be found on Aegean, Master Spa, Sunrise Spas, Artesian, Cal Spas, Clearwater, Coleman Spas, La Spas, Gulf Coast, Saratoga, Marquis Spas, Vita Spas and many more.
$114.36
Aqua-Flo XP2e 3HP 56f Wet End Assembly
Genuine complete replacement 56 Frame Aqua-flo XP2e wet end with 3hp rated internal impeller and designed specifically for use with Hot Tubs and Spas. This XP2e wet end only fits older discontinued 56 Frame (6.1″) pump motors.
The best way to identify an Aqua-flo 56 frame wet end model regardless of its impeller size is they have a part number of 92770715 stamped into one of the four support legs on the rear of the wet end.
- Plumbing connections: 2 inch unions.
- Wet End Frame Size – 56
- Wet End Type – Side Discharge
- Wet End Horsepower: 3HP
- Length: 200 mm Height: 185 mm Width: 140mm
- Commonly used with: This wet end can be found on Aqua-flo pumps with old EMG motors fitted to Tiger River Spas and Hotspring Spas.
$76.79
Balboa Wet End 2.0HP Vico Ultimax Niagara
This wet end is from Balboa Water Group. The item is formerly known as a Vico wet end now known as a Ultimax / Niagara wet end and includes Internally factory fitted seal, the housing, the face plate, the face plate o-ring, and the impeller.
- Plumbing connections: 2 inches
- Wet End Horsepower: 2HP
- Length: 195 mm Height: 150 mm Width: 168mm
- Commonly used with: This unit is very similar in appearance to the Vico Ultima / Ultrajet wet end used on Hydropool and Canadian Spas but the outlets and overall size of the wet end are slightly different. Must on be fitted to Vico Ultimax pumps or Balboa Niagara pumps. This unit is to fit on frame size 90 which is a similar size to the industry standard 56 frame sizing.
$76.79
Balboa Wet End 3.0HP Vico Ultimax Niagara
This wet end is from Balboa Water Group. The item is formerly known as a Vico wet end now known as a Ultimax / Niagara wet end and includes Internally factory fitted seal, the housing, the face plate, the face plate o-ring, and the impeller.
- Plumbing connections: 2 inches
- Wet End Horsepower: 3HP
- Length: 195 mm Height: 150 mm Width: 168mm
- Commonly used with: This unit is very similar in appearance to the Vico Ultima / Ultrajet wet end used on Hydropool and Canadian Spas but the outlets and overall size of the wet end are slightly different. Must on be fitted to Vico Ultimax pumps or Balboa Niagara pumps. This unit is to fit on frame size 90 which is a similar size to the industry standard 56 frame sizing.
$119.09
Waterway 2HP Centre Discharge Wet End (1.5 x 1.5)
Genuine direct replacement Waterway 48 Frame centre discharge pump wet end with an internal 2hp rated impeller. This unique wet end model has 1.5-inch connections on both the inlet and outlet plumbing union connections (1.5 inch = 63mm thread OD). This type of Waterway wet end is found on 1.5hp & 2hp Waterway E-series hot tub pumps here in the UK & Europe.
Has been used in the past on very old Coast Spas, ideal for pumps found on Dream Maker Spas and others.
- Plumbing connections: 1.5inch
- Wet End Frame Size – 48
- Wet End Type – Centre Discharge
- Wet End Horse Power – 2HP
- Length: 180 mm Height: 175mm Width: 130 mm
- Commonly used with: very old Coast Spas, ideal for pumps found on Dream Maker Spas and others.
$113.59
Waterway 2HP Side Discharge Wet End (1.5 x 1.5)
Genuine direct replacement Waterway 2HP Side Discharge Wet End (1.5 x 1.5) with an internal 4hp rated impeller. The Viper pump is mainly used on Swim spas for swim against swim jets. It has a unique Waterway wet end that has large 2.5-inch plumbing union connections on both the inlet and outlet, (Thread OD – 93mm).
This type of Waterway Wet End is found on 1.5HP & 2HP Waterway E-series Centre Discharge – 48 F – hot tub pumps here in the UK & Europe.
- Plumbing connections: 2.5 inch
- Wet End Frame Size – 56
- Wet End Type – Side Discharge
- Wet End Horse Power – 4HP
- Commonly used with: Will fit motors made by brands such as EMG, EME, AO Smith, Franklin Electric, Century Laser, US Motors & Emerson. Does NOT fit Chinese manufactured motors from WP500-II LX pumps.
$121.20
Waterway 48f 4HP Hi-Flo Wet End (2×2) HA440 Replacement
Genuine direct replacement Waterway 48 Frame pump Hi-Flo wet end with 2-inch plumbing union connections on both the inlet and outlet (78mm thread OD). The Waterway Hi-Flo wet end is a powerful yet compact wet end with a large-sized 4hp rated impeller. This type of Waterway wet end is found on 1.5hp and 2hp Waterway Hi-Flo hot tub pumps and they are Waterway’s most common European 48 frame pump. This Hi-Flo wet end can be found on Beachcomber spas, Spaform Hot Tubs & others.
- Plumbing connections: 2 inch unions.
- Wet End Frame Size – 48
- Wet End Type – Side Discharge
- Wet End Horse Power – 4HP
- Length: 190 mm Height: 120mm Width: 170 mm
- Commonly used with:This Hi-Flo wet end can be found on Beachcomber spas, Spaform Hot Tubs & others.
$112.92
Waterway 56f 4HP Wet End Assembly (2.5 x 2)
Genuine direct replacement Waterway 56 Frame pump wet end with an internal 4hp rated impeller. This is the less common model that has a larger 2.5-inch inlet and 2-inch outlet plumbing union connections. 2-inch and 2.5- inch are just plumbing terms the diameters of the threaded connections are 78mm x 93mm.
This type of Waterway wet end is found on 2hp Waterway Executive hot tub pumps here in the UK & Europe.
- Plumbing connections: 2.5 (intake) x 2 inch (outlet)
- Wet End Frame Size – 56
- Wet End Type – Side Discharge
- Wet End Horse Power – 5HP
- Length: 230 mm Height: 200mm Width: 145 mm (from face of intake to end of fixing spigot as pictured)
- Commonly used with: Will fit motors made by brands such as EMG, EME, AO Smith, Franklin Electric, Century Laser, US Motors & Emerson. Does NOT fit Chinese manufactured motors from LX pumps.
$105.73
Waterway 56f 4HP Wet End Assembly (2×2)
Genuine direct replacement Waterway 56 Frame pump wet end with internal 4hp rated impeller and 2-inch plumbing union connections on both the inlet and outlet (78mm thread OD). This type of Waterway wet end is found on 2hp Waterway Executive hot tub pumps here in the UK & Europe.
- Plumbing connections: 2.5 (intake) x 2 inch (outlet)
- Wet End Frame Size – 56
- Wet End Type – Side Discharge
- Wet End Horse Power – 5HP
- Length: 230 mm Height: 200mm Width: 145 mm (from face of intake to end of fixing spigot as pictured)
- Commonly used with: Will fit motors made by brands such as EMG, EME, AO Smith, Franklin Electric, Century Laser, US Motors & Emerson. Does NOT fit Chinese manufactured motors from LX pumps.
