$106.02
Waterway 56f 5HP Wet End Assembly (2.5×2)
Genuine direct replacement Waterway 56 Frame pump wet end with an internal 5hp rated impeller. This is the less common model that has a larger 2.5-inch inlet and 2-inch outlet plumbing union connections. 2-inch and 2.5- inch are just plumbing terms, the diameters of the threaded connections are 78mm x 93mm.
This type of Waterway wet end is found on 2.5hp and 3hp Waterway Executive hot tub pumps here in the UK & Europe.
- Plumbing connections: 2.5 (intake) x 2 inch (outlet)
- Wet End Frame Size – 56
- Wet End Type – Side Discharge
- Wet End Horse Power – 5HP
- Length: 230 mm Height: 200mm Width: 145 mm (from face of intake to end of fixing spigot as pictured)
- Commonly used with: Will fit motors made by brands such as EMG, EME, AO Smith, Franklin Electric, Century Laser, US Motors & Emerson. Does NOT fit Chinese manufactured motors from LX pumps.
$117.96
Waterway 56f 5HP Wet End Assembly (2×2)
Genuine direct replacement Waterway 56 Frame pump wet end with internal 5hp rated impeller and 2-inch plumbing union connections on both the inlet and outlet (78mm thread OD). This type of Waterway wet end is found on 2.5hp & 3hp Waterway Executive hot tub pumps here in the UK & Europe.
- Plumbing connections: 2 Inch
- Wet End Frame Size – 56
- Wet End Type – Side Discharge
- Wet End Horse Power – 5HP
- Length: 230 mm Height: 200mm Width: 145 mm (from face of intake to end of fixing spigot as pictured)
- Commonly used with: This type of Waterway wet end is found on 2.5hp & 3hp Waterway Executive hot tub pumps here in the UK & Europe.
$117.96
Waterway Exec Euro 48 Wet End 2.5 x 2
Genuine direct replacement Waterway 48 Frame pump wet end with an internal 4hp rated impeller. This is the less common model that has a larger 2.5-inch inlet and 2-inch outlet plumbing union connections. 2-inch and 2.5- inch are just plumbing terms the diameters of the threaded connections are 78mm x 93mm.
This type of Waterway wet end is found on 1.5hp and 2hp Waterway Executive hot tub pumps here in the UK & Europe.
- Plumbing connections: 2.5 (intake) x 2 inch (outlet)
- Wet End Frame Size – 48
- Wet End Type – Side Discharge
- Wet End Horse Power – 4HP
- Length: 230 mm Height: 200mm Width: 145 mm (from face of intake to end of fixing spigot as pictured)
- Commonly used with: This type of Waterway wet end is found on 1.5hp and 2hp Waterway Executive hot tub pumps here in the UK & Europe.
$127.26
Waterway Exec Euro 48 Wet End (2×2)
Genuine direct replacement Waterway 48 Frame pump Hi-Flo wet end with 2-inch plumbing union connections on both the inlet and outlet (78mm thread OD). The Waterway Hi-Flo wet end is a powerful yet compact wet end with a large-sized 4hp rated impeller. This type of Waterway wet end is found on 1.5hp and 2hp Waterway Hi-Flo hot tub pumps and they are Waterway’s most common European 48 frame pump. This Hi-Flo wet end can be found on Beachcomber spas, Spaform Hot Tubs & others.
Can be used to replace the wet end on the old MagnaFlow HydroAir HA440 pump which is found on Spaform spas. You will, however, need to buy flat gaskets in the related products to seal the plumbing connections.
- Plumbing connections: 2 inch unions.
- Wet End Frame Size – 48
- Wet End Type – Side Discharge
- Wet End Horse Power – 4HP
- Length: 230 mm Height: 200mm Width: 145 mm (from face of intake to end of fixing spigot as pictured)
- Commonly used with:This Hi-Flo wet end can be found on Beachcomber spas, Spaform Hot Tubs & others.
$95.62
Wet End 2.0HP Vico Ultrajet (Ultima)
Complete replacement Vico Ultrajet wet end with 2hp rated internal impeller and designed specifically for use with Hot Tubs and Spas. Vico is a pump manufacturing sub-brand of Balboa Water Group, Vico manufactured the now discontinued Ultrajet spa pump for Balboa many years ago. These distinctive shaped Ultrajet wet ends are the genuine replacement part from Vico and are still obtainable to us from Balboa.
- Plumbing connections: 2 x 2 inch unions.
- Wet End Frame Size – 48
- Wet End Type – Side Discharge
- Wet End Horsepower: 2HP
- Length: 190 mm Height: 160 mm Width: 140mm
- Commonly used with: This exact wet end can be found on very old spas by brands such as Canadian Spa, Hydropool Hot Tubs, Can Spa, Coast Mountain and others.
$86.14
Wet End 3.0HP Vico Ultrajet (Ultima)
Complete replacement Vico Ultrajet wet end with 3hp rated internal impeller and designed specifically for use with Hot Tubs and Spas. Vico is a pump manufacturing sub-brand of Balboa Water Group, Vico manufactured the now discontinued Ultrajet spa pump for Balboa many years ago. These distinctive shaped Ultrajet wet ends are the genuine replacement part from Vico and are still obtainable to us from Balboa.
- Plumbing connections: 2 x 2 inch unions.
- Wet End Frame Size – 48
- Wet End Type – Side Discharge
- Wet End Horsepower: 3HP
- Length: 190 mm Height: 160 mm Width: 140mm
- Commonly used with: This exact wet end can be found on very old spas by brands such as Canadian Spa, Hydropool Hot Tubs, Can Spa, Coast Mountain and others.
$87.78
Wet End for 1.5HP Sta-Rite (HA440NG)
Complete replacement Balboa HA440NG spa pump wet end with 1.5hp rated internal impeller and designed specifically for use with Hot Tubs and Spas. The HA440NG wet end is manufactured by Sta-Rite for the Balboa Water Group.
This wet end must be bolted onto a Balboa motor only, it requires a Balboa motor as they have a long motor shaft length for the mechanical seal to work correctly.
- Plumbing connections: 2 inches
- Wet End Horsepower: 1.5HP
- Length: 195 mm Height: 150 mm Width: 165mm
- Commonly used with: This wet end is used on our HA440NG pumps but is also the same wet end used when the pump was called Sta-Rite and often labelled up as 1.0HP found on Master Spas in the past.
$96.20
Wet End for 2HP Durajet (Cascade)
Complete replacement Sta-Rite (Balboa) Durajet spa pump wet end with 2hp rated internal impeller and designed specifically for use with Hot Tubs and Spas. This wet end is very distinctive and can be easily recognised by having fins in the front volute face. The Sta-Rite Durajet pump made by Pentair was discontinued some time ago now but these genuine original wet ends along with the complete pumps have now been re-manufactured by Balboa.
- Plumbing connections: 2 x 2 inch unions.
- Wet End Frame Size – 48 or 56
- Wet End Type – Side Discharge
- Wet End Horsepower: 2HP
- Length: 190 mm Height: 188 mm Width: 130mm
- Commonly used with:This exact wet end can be found on USA spa brands such as Dimension One Spas, Master Spas, HotSprings & others.
$29.35
Wet End for DH1.0
Complete replacement Chinese LX DH1.0 circulation spa pump wet end with 1hp rated internal impeller and designed specifically for use with Hot Tubs and Spas. LX wet ends are unique to each model of LX spa pump so if you have a DH1.0 circulation pump this wet end this is the only replacement for it, order with confidence.
- Wet End Type: Centre Discharge
- Amps: 3.6
- Volts: 230
- Hz: 50
- RPM: 2900
- Wet End Horsepower: 1HP
- Plumbing connections: 1.5inch inlet and outlet Male – Buttress thread
- Length: 125 mm Height: 175 mm Width: 155 mm
- Commonly used with: DH1.0 pump from LX
$77.08
Wet End for JA200
Complete replacement Chinese JA200 spa pump wet end with 4hp rated internal impeller and designed specifically for use with Hot Tubs and Spas. LX wet ends are unique to each model of LX spa pump so if you have a JA200 pump this wet end this is the only replacement for it, order with confidence.
- Wet End Type: Centre Discharge
- Wet End Horsepower: 2HP
- Plumbing connections: Outlet – 1.5 inches -Inlet – 1.5 inches
- Length: 186 mm Height: 201 mm Depth: 126mm
- Commonly used with: LX TDA200/JA200 pumps
$48.00
Wet End for JA35 and JA50
Complete replacement LX JA35 & JA50 circulation spa pump wet end with 1hp rated internal impeller and designed specifically for use with Hot Tubs and Spas. LX wet ends are unique to each model of LX spa pump so if you have a JA35 or JA50 circulation pump this wet end this is the only replacement for it, order with confidence.
- Wet End Type: Centre Discharge
- Wet End Impeller HP: 1.5
- Wet End Horsepower: 0.5HP
- Plumbing connections: Outlet – 1.5 inches (63mm Thread OD)-Inlet – 1.5 inches (63mm Thread OD)
- Length: 125 mm Height: 175 mm Width: 155 mm
- Commonly used with: JA75 and JA100
$46.50
Wet End for JA75 and JA100
Complete replacement LX JA75 & JA100circulation spa pump wet end with 1hp rated internal impeller and designed specifically for use with Hot Tubs and Spas. LX wet ends are unique to each model of LX spa pump so if you have a JA35 or JA50 circulation pump this wet end this is the only replacement for it, order with confidence.
- Wet End Type: Centre Discharge
- Wet End Impeller HP: 1.5
- Wet End Horsepower: 1HP
- Plumbing connections: Outlet – 1.5 inches (63mm Thread OD)-Inlet – 1.5 inches (63mm Thread OD)
- Length: 125 mm Height: 175 mm Width: 155 mm
- Commonly used with: JA75 and JA100
$56.52
Wet End for LP200 and WP200
Complete replacement LX LP200 & WP200-II spa pump wet end with 2hp rated internal impeller and designed specifically for use with Hot Tubs and Spas. LX wet ends are unique to each model of LX spa pump so if you have a WP200 or LP200 pump this wet end this is the only replacement for it, order with confidence.
- Wet End Type: Side Discharge
- Wet End Horsepower: 2HP
- Plumbing connections: Outlet – 2 inches 78mm Thread OD-Inlet – 2 inches 78mm Thread OD
- Length: 140 mm Height: 210 mm Width: 195 mm
- Commonly used with: LP200 and WP200 pumps
$58.46
Wet End for LP300 & WP300
Complete replacement LP300 and WP300 spa pump wet end with 2hp rated internal impeller and designed specifically for use with Hot Tubs and Spas. LX wet ends are unique to each model of LX spa pump so if you have a WP200 or LP200 pump this wet end this is the only replacement for it, order with confidence.
- Wet End Type: Side Discharge
- Wet End Horsepower: 3HP
- Plumbing connections: Outlet – 2 inches 78mm Thread OD-Inlet – 2 inches 78mm Thread OD
- Length: 202 mm Height: 195 mm Depth: 140 mm
- Commonly used with: LP300 and WP300 pumps
$52.91
Wet End for LX EA350
Complete replacement Chinese LX EA3500 spa pump wet end with 4hp rated internal impeller and designed specifically for use with Hot Tubs and Spas. LX wet ends are unique to each model of LX spa pump so if you have a LX EA350 pump this wet end this is the only replacement for it, order with confidence.
- Wet End Type: Centre Discharge
- Wet End Horsepower: 1HP
- Plumbing connections: Outlet – 1.5 inches -Inlet – 1.5 inches
- Length: 185 mm Height: 165 mm Depth: 155mm
- Commonly used with: Wet End for LX EA350
$72.83
Wet End for LX TDA150
Complete replacement Chinese LX TDA150 spa pump wet end with 4hp rated internal impeller and designed specifically for use with Hot Tubs and Spas. LX wet ends are unique to each model of LX spa pump so if you have a LX TDA150 pump this wet end this is the only replacement for it, order with confidence.
- Wet End Type: Centre Discharge
- Wet End Horsepower: 1.5HP
- Plumbing connections: Outlet – 1.5 inches -Inlet – 1.5 inches
- Length: 186 mm Height: 216 mm Depth: 140mm
- Commonly used with: Wet End for LX TDA150
