$103.73
Aqua-Flo XP2 2HP* 56f (6.1 inch Euro Legs) Wet End Assembly (2×2)
Complete replacement Aqua-Flo CMHP Wet End Assembly, designed specifically for use with Hot Tubs and Spas. This Hi-flo 2HP rated side discharge wet end is the correct replacement for Aqua-flo’s Flo-Master XP2e and XP2 Pump.
This complete Aqua-Flo XP2 2HP is specific to the XP2 Circ pump used on Emerson motors.
- Plumbing connections: 2 inch unions.
- Wet End Frame Size – 56
- Wet End Type – Side Discharge
- Wet End Horsepower: 2HP
- Length: 200 mm Height: 185 mm (main face diameter not screw holes) Width: 140mm
- Commonly used with: XP2 Circ pump used on Emerson motors.
$103.73
Gecko XP2e Wet End 2.5HP* 56f (6.1″ Euro Legs) Wet End Assembly (2×2)
Genuine replacement 56 Frame (6.1″) Aqua-flo XP2e wet end with 2.5hp rated internal impeller and designed specifically for use with Hot Tubs and Spas. This XP2e wet end only fits older discontinued 56 Frame (6.1″) pump motors.
- Plumbing connections: 2 inch unions.
- Wet End Frame Size – 56 Frame (6.1″)
- Wet End Type – Side Discharge
- Wet End Horsepower: 2.5HP
- Length: 285 mm Height: 185 mm (main face diameter not screw holes) Width: 140mm
- Commonly used with: This wet end can be found on Aqua-flo pumps with old EMG motors fitted to Tiger River Spas and Hotspring Spas.
$114.36
Aqua-Flo XP2e 3HP 48f Wet End Assembly
Genuine complete replacement 48 Frame Aqua-flo XP2e wet end with 3hp rated internal impeller and designed specifically for use with Hot Tubs and Spas. This 3hp XP2e wet end fits all 48 frame sized Aqua-flo pumps/motors.
The best way to identify an Aqua-flo 48 frame wet end model regardless of its impeller size is they have a part number of 92770705 stamped into one of the four support legs on the rear of the wet end.
- Plumbing connections: 2 inch unions.
- Wet End Frame Size – 48
- Wet End Type – Side Discharge
- Wet End Horsepower: 3HP
- Length: 285 mm Height: 185 mm Width: 140mm
- Commonly used with: This exact wet end can be found on Aegean, Master Spa, Sunrise Spas, Artesian, Cal Spas, Clearwater, Coleman Spas, La Spas, Gulf Coast, Saratoga, Marquis Spas, Vita Spas and many more.
$114.36
Aqua-Flo XP2e 3HP 56f Wet End Assembly
Genuine complete replacement 56 Frame Aqua-flo XP2e wet end with 3hp rated internal impeller and designed specifically for use with Hot Tubs and Spas. This XP2e wet end only fits older discontinued 56 Frame (6.1″) pump motors.
The best way to identify an Aqua-flo 56 frame wet end model regardless of its impeller size is they have a part number of 92770715 stamped into one of the four support legs on the rear of the wet end.
- Plumbing connections: 2 inch unions.
- Wet End Frame Size – 56
- Wet End Type – Side Discharge
- Wet End Horsepower: 3HP
- Length: 200 mm Height: 185 mm Width: 140mm
- Commonly used with: This wet end can be found on Aqua-flo pumps with old EMG motors fitted to Tiger River Spas and Hotspring Spas.
$31.00
Aqua-Flo XP2e CE Pump Impeller 1.5hp
Genuine replacement 1.5hp impeller for the European Aqua-flo XP2e CE pump wet ends designed specifically for use with Hot Tubs & Spas. These 1.5hp impellers will only fit the new blue XP2e pump wet ends and you should fit the same horsepower equivalent. The horsepower rating is determined by the Vein Gap Distance.
- Impeller HP – 1.5hp & 2hp @ 60Hz
- Vein Gap Distance – 10mm
- Intake Outer Diameter – 66mm
- Diameter – 102mm
- Length – 83mm
- Colour Dot ID – Blue/Silver
$32.00
Aqua-Flo XP2e CE Pump Impeller 2hp
Genuine replacement 2hp impeller for the European Aqua-flo XP2e CE pump wet ends designed specifically for use with Hot Tubs & Spas. These 2hp impellers will only fit the 6.1 wet ends and the new blue CE XP2e pump wet ends and you should fit the same horsepower equivalent. The horsepower rating is determined by the Vein Gap Distance.
- Impeller HP -2hp 50hz & 3hp @ 60Hz
- Vein Gap Distance – 13mm
- Intake Outer Diameter – 60mm
- Diameter – 115mm
- Length – 83mm
- Colour Dot ID – Silver/Silver
$32.00
Aqua-Flo XP2e CE Pump Impeller 3hp
Genuine replacement 3hp impeller for the Aqua-flo Flomaster XP2 pump wet ends designed specifically for use with Hot Tubs & Spas. These 3hp impellers are the most common in Europe and will ONLY fit the XP2 pump wet ends, you should always fit the same horsepower equivalent. The horsepower rating can be identified by the vein gap distance.
- Impeller HP – 3hp @ 60Hz
- Vein Gap Distance – 11mm
- Intake Outer Diameter – 53mm
- Diameter – 110mm
- Length – 80mm
- Colour Dot ID – Green/Green
$28.82
Aqua-Flo XP2e Flomaster Impeller 2.5hp
Genuine replacement 2.5hp impeller for the modern Aqua-flo Flomaster XP2e pump wet ends designed specifically for use with Hot Tubs & Spas. These 2.5hp impellers will ONLY fit the modern XP2e pump wet ends and you should always fit the same horsepower equivalent. The horsepower rating can be identified by the vein gap distance.
- Impeller HP -2.5hp
- Vein Gap Distance – 11mm
- Intake Outer Diameter – 60mm
- Diameter – 102mm
- Length – 83mm
- Colour Dot ID – Silver/White
$385.67
Balboa HA440NG Spa Pump – 1 ½HP – 1 Speed – 79mm Centre Suction x 79mm Side Discharge
The Balboa HA440NG Spa Pump – 1 ½HP – 1 Speed MPN -1023063 is the ultimate benchmark in design, performance & flexibility, directly replaces failed Spaform hot tub pumps.
- Power reference: 1.5 HP 1 speed
- Volts: 230
- Hz: 50
- Wet End Impellor HP: 1.5
- RPM Low / High: 2900
- Amps Draw:5.6 A
- Frame Size: 48F
- Plumbing connections: 2-inch suction and discharge ports
- Electrical connections: Supplied with a 3-core cable and AMP plug
- Length: 390 mm Height: 230 mm Depth: 190 mm
- Commonly used with: This Pump is the replacement for the original HA440 Commonly Found On the Spaform Spas. It’s also the direct replacement for the discontinued GC150 with the blue wet end. It is not a straight swap for the GC150 as there are a few plumbing changes needed. This pump will perform at its best with 2-inch plumbing. This pump does not always perform at its best when plumbed into 1.5-inch plumbing combined with running through a water diverter valve.
$455.44
Balboa HA440NG Spa Pump – 1 ½HP – 2 Speed 79mm Centre Suction x 79mm Side Discharge
The Balboa HA440NG Spa Pump – 1 ½HP – 2 Speed MPN -1023024 is the ultimate benchmark in design, performance & flexibility, directly replaces failed Spaform hot tub pumps.
- Power reference: 1.5 HP 1 speed
- Volts: 230
- Hz: 50
- Wet End Impellor HP: 1.5
- RPM Low / High:2900 / 1450
- Amps Draw: 5.7 / 1.5 A
- Frame Size: 48F
- Plumbing connections: 2-inch suction and discharge ports
- Electrical connections: Supplied with a 4-core cable and AMP plug
- Length: 390 mm Height: 230 mm Depth: 190 mm
- Commonly used with: Serves as a direct replacement for older HA440 Magnaflow models, commonly found in Spaform hot tubs.
$530.09
Balboa Niagara Ultimax 2HP 1spd Pump
The Balboa Niagara 2 HP Single-Speed Pump MPN 1023321 is a reliable and efficient solution for spa systems.
- Power reference: 2.0 HP 1 speed
- Volts: 230
- Hz: 50
- Frame Size: 56F
- Wet End Impellor HP: 2
- Amp Draw:8.7 A
- Plumbing connections: 2”
- Electrical connections: 3 core AMP
- Length: 459 mm Height: 203 mm Depth: 203 mm
- Commonly used with: Direct replacement for Vico Ultrajet, Ultimax, and Sta-Rite pumps and is commonly used in spa brands such as Hydropool, Canadian Spa, Master Spa, Elite Spas, and Dimension One.
$550.90
Balboa Niagara Ultimax 3HP 1 Speed Pump
The Balboa Niagara 3 HP Single-Speed Pump MPN 1023331 is a reliable and efficient solution for spa systems.
- Power reference: 3.0 HP 1 speed
- Volts: 230
- Hz: 50
- Frame Size: 56F
- Wet End Impellor HP: 2
- Amp Draw: 11.5 A
- Plumbing connections: 2”
- Electrical connections: 3 core AMP
- Length: 459 mm Height: 203 mm Depth: 203 mm
- Commonly used with: Direct replacement for Vico Ultrajet, Ultimax, and Sta-Rite pumps and is commonly used in spa brands such as Hydropool, Canadian Spa, Master Spa, Elite Spas, and Dimension One.
$23.99
Balboa Sensor Assembly Pre M7
Single connector to the circuit board with two sensors. Used with systems such as M3TUV, Lite Leader and 2000 Value series including 2005LE with pressure switch.
- Temperature Probe Diameter: 9 mm
- Hi Limit Probe Diameter: 5 mm
- Temp Cable Length: 2438mm or 96 inches
- Hi limit cable length: 787mm or 31 inches
- Commonly used with: Systems such as M3TUV, Lite Leader and 2000 Value series including 2005LE with pressure switch.
$76.79
Balboa Wet End 2.0HP Vico Ultimax Niagara
This wet end is from Balboa Water Group. The item is formerly known as a Vico wet end now known as a Ultimax / Niagara wet end and includes Internally factory fitted seal, the housing, the face plate, the face plate o-ring, and the impeller.
- Plumbing connections: 2 inches
- Wet End Horsepower: 2HP
- Length: 195 mm Height: 150 mm Width: 168mm
- Commonly used with: This unit is very similar in appearance to the Vico Ultima / Ultrajet wet end used on Hydropool and Canadian Spas but the outlets and overall size of the wet end are slightly different. Must on be fitted to Vico Ultimax pumps or Balboa Niagara pumps. This unit is to fit on frame size 90 which is a similar size to the industry standard 56 frame sizing.
$76.79
Balboa Wet End 3.0HP Vico Ultimax Niagara
This wet end is from Balboa Water Group. The item is formerly known as a Vico wet end now known as a Ultimax / Niagara wet end and includes Internally factory fitted seal, the housing, the face plate, the face plate o-ring, and the impeller.
- Plumbing connections: 2 inches
- Wet End Horsepower: 3HP
- Length: 195 mm Height: 150 mm Width: 168mm
- Commonly used with: This unit is very similar in appearance to the Vico Ultima / Ultrajet wet end used on Hydropool and Canadian Spas but the outlets and overall size of the wet end are slightly different. Must on be fitted to Vico Ultimax pumps or Balboa Niagara pumps. This unit is to fit on frame size 90 which is a similar size to the industry standard 56 frame sizing.
$404.50
Balboa/Pentair Durajet 2.0 HP 1 SPD Pump
The Balboa durajet 2.0 HP 1 speed pump is manufactured by Balboa with the help of a Pentair wet end. This pump can be found in many hot tubs including Hotsprings.
- Power reference: 2.0 HP 1 speed
- Volts:230
- Hz:50
- RPM Low / High: 2800
- Wet End Impellor HP: 2.0
- Amps Low / High Speed: 8.7
- Plumbing connections: 2 inch unions
- Electrical connections: 1 x 3 core cable (not supplied)
- Length: 380 mm Height: 220.72 mm Depth: 165.10 mm
- Commonly used with: This pump can be found in many hot tubs including Hotsprings
