- HomeProducts tagged “Aqua-flo”
$534.00
Aqua-Flo by Gecko XP2e 1.5HP 2 Speed Pump (2×2)
The Aqua-Flo by Gecko XP2e 1.5 HP 2 Speed Pump is designed for high-flow spa applications, enhancing water circulation and jet performance.
- Power reference: 2.5 HP 2 speed MPN 05320024-8040
- Power: :Volts: 230
- Hz: 50
- Motor HP Low / High: 1.5
- Amps Low / High Speed: 1.6 / 6.7
- RPM Low / High: 1440 /2840
- Capacitor Low / High: 16 / 25
- Plumbing connections: 2 x 2 inch unions
- Electrical connections: 1 x 4 core JJ lead
- Length: 379 mm Height: 232 mm Depth: 203 mm
- Commonly used with: This pump can be used on a variety of Spas.
$499.00
Aqua-Flo by Gecko XP2e 2.0HP 2 Speed Pump
The Aqua-Flo by Gecko XP2e 2 HP 2-Speed Pump is designed for high-flow spa applications, enhancing water circulation and jet performance.
- Power reference: 2.0 HP 2 speed
- Volts: 230
- Hz: 50
- Motor HP Low / High: 2
- Amps Low / High Speed: 1.8 / 9
- RPM Low / High: 1450 /2850
- Plumbing connections: 2 x 2 inch unions
- Electrical connections: 1 x 4 core JJ lead
- Length: 379 mm Height: 230 mm Depth: 203 mm
- Commonly used with: This pump can be used on a variety of Spas.
$443.20
Aqua-Flo by Gecko XP2e 2.5HP 1 Speed
The Aqua-Flo by Gecko XP2e 2.5 HP Single-Speed Pump is designed for high-flow spa applications, enhancing water circulation and jet performance.
- Power reference: 2.5 HP 1 speed
- Volts: 230
- Hz: 50
- Motor HP Low / High: 2.5
- Amps Low / High Speed: 10.3
- RPM Low / High: 2840
- Plumbing connections: 2 x 2 inch unions
- Electrical connections: Comes with 3 core amp cable attached, you can easily replace this for your existing wire on site.
- Length: 379 mm Height: 232 mm Depth: 203 mm
- Commonly used with: This pump can be used on a variety of Spas.
$682.19
Aqua-Flo by Gecko XP2e 2.5HP 2 Speed Pump
The Aqua-Flo by Gecko XP2e 2.5 HP Single-Speed Pump is designed for high-flow spa applications, enhancing water circulation and jet performance.
- Power reference: 2.5 HP 2 speed
- Volts: 230
- Hz: 50
- Motor HP Low / High: 2.5
- Amps Low / High Speed: 1.8 / 10.3
- RPM Low / High: 1450 /2850
- Capacitor Low / High: 16 / 45
- Plumbing connections: 2 x 2 inch unions
- Electrical connections: 1 x 4 core JJ lead
- Length: 432 mm Height: 235 mm Depth: 202 mm
- Commonly used with: This pump can be used on a variety of Spas.
$429.19
Aqua-Flo by Gecko XP2e 2HP 1 Speed Pump
The Aqua-Flo by Gecko XP2e 2 HP Single-Speed Pump is designed for high-flow spa applications, enhancing water circulation and jet performance.
- Power reference: 2.0 HP 1 speed
- Volts: 230
- Hz: 50
- Motor HP Low / High: 2
- Amps Low / High Speed: 9
- RPM Low / High: 2840
- Plumbing connections: 2 x 2 inch unions
- Electrical connections: Comes with 3 core amp cable attached, you can easily replace this for your existing wire on site.
- Length: 379 mm Height: 232 mm Depth: 202 mm
- Commonly used with: This pump can be used on a variety of Spas.
$369.85
Aqua-Flo by Gecko XP2e 3HP 1 Speed Pump
The Aqua-Flo by Gecko XP2e 3HP Single-Speed Pump MPN 05253000-6040 is designed for high-flow spa applications, enhancing water circulation and jet performance.
- Power reference: 3.0 HP 1 speed
- Volts: 230
- Hz: 50
- Motor HP Low / High: 3
- Amps Low / High Speed: 12.8 RPM Low / High: 2840
- Plumbing connections: 2 x 2 inch unions
- Electrical connections: Comes with 3 core amp cable attached, you can easily replace this for your existing wire on site.
- Length: 427 mm Height: 241 mm Depth: 203 mm
- Commonly used with: This pump can be used on a variety of Spas.
$32.00
Aqua-Flo Circ Master 1HP Hi-Flo Impeller
Genuine replacement 1hp impeller for the Aqua-flo Circ-Master circulation pump wet ends designed specifically for use with Hot Tubs & Spas. These 1hp impellers will fit either the Circ-Master HP or Circ-Master CP pump wet ends but you should fit the same horsepower equivalent. The horsepower rating is determined by the Vein Gap Distance.
- Impeller HP – 1hp
- Vein Gap Distance – 5mm
- Intake Outer Diameter – 44mm
- Diameter – 95mm
- Length – 90mm
- Colour Dot ID – Orange
$32.00
Aqua-Flo Circ Master 2 HP Hi-Flo Impeller
Genuine replacement 2hp impeller for the Aqua-flo Circ-Master circulation pump wet ends designed specifically for use with Hot Tubs & Spas. These 2hp impellers will fit either the Circ-Master HP or Circ-Master CP pump wet ends but you should fit the same horsepower equivalent. The horsepower rating is determined by the Vein Gap Distance.
- Impeller HP – 2hp
- Vein Gap Distance – 12mm
- Intake Outer Diameter – 40mm
- Diameter – 90mm
- Length – 92mm
- Colour Dot ID – Blue
$32.00
Aqua-Flo Circ Master Circ-Master HP and CP CE
Genuine replacement 2hp impeller for the Aqua-flo Circ-Master circulation pump wet ends designed specifically for use with Hot Tubs & Spas. These 2hp impellers will fit either the Circ-Master HP or Circ-Master CP pump wet ends but you should fit the same horsepower equivalent. The horsepower rating is determined by the Vein Gap Distance.
- Impeller HP – 2hp
- Vein Gap Distance – 12mm
- Intake Outer Diameter – 40mm
- Diameter – 90mm
- Length – 92mm
- Colour Dot ID – Blue
$100.69
Aqua-Flo Circ-Master CP Wet Ends 48FR (1.5″x1.5″)
Complete replacement 48 Frame Aqua-flo Circ-Master CMCP circulation pump wet end with 1/15hp rated internal impeller, designed specifically for use with Hot Tubs and Spas. This is for the less common Circ-Master CP Pump (Centre Discharge) usually with an Emerson Motor.
- Plumbing connections: 1.5 inch unions.
- Wet End Frame Size – 48
- Wet End Type – Centre Discharge
- Wet End Horsepower: 1.5 HP
- Length: 185 mm Height: 170 mm Width: 140mm
- Commonly used with: This is for the less common Circ-Master CP Pump (Centre Discharge) usually with an Emerson Motor.
$100.69
Aqua-Flo Circ-Master HP Wet End 48FR
Complete replacement 48 Frame Aqua-flo Circ-Master HP circulation pump wet end rated at 1/15hp, designed specifically for use with Hot Tubs and Spas. This is for the very common Circ-Master HP Pump (Side Discharge) fitted usually with an Emerson Motor.
- Plumbing connections: 1.5 inch unions.
- Wet End Frame Size – 48
- Wet End Type – Side Discharge
- Wet End Horsepower: 1.5HP
- Length: 205 mm Height: 170 mm Width: 145mm
- Commonly used with: This is for the very common Circ-Master HP Pump (Side Discharge) fitted usually with an Emerson Motor..
$100.69
Aqua-Flo Circ-Master XP Wet End 48FR
Complete replacement 48 Frame Aqua-flo Circ-Master XP circulation pump wet end with 2hp rated internal impeller, designed specifically for use with Hot Tubs and Spas. This is for the uprated Circ-Master XP with US Motor & XP2e wet end commonly found on Sundance Spas & Jacuzzi Hot Tubs.
- Plumbing connections: 2 inch unions.
- Wet End Frame Size – 48
- Wet End Type – Side Discharge
- Wet End Horsepower: 2HP
- Length: 285 mm Height: 185 mm Width: 140mm
- Commonly used with: This is for the uprated Circ-Master XP with US Motor & XP2e wet end commonly found on Sundance Spas & Jacuzzi Hot Tubs.
$90.71
Aqua-Flo CMCP Wet End Assembly
Complete replacement Aqua-Flo CMCP Wet End Assembly, designed specifically for use with Hot Tubs and Spas. This is for the uprated Circ-Master XP with US Motor & XP2e wet end commonly found on Sundance Spas & Jacuzzi Hot Tubs.
- Plumbing connections: 1.5 inch unions.
- Wet End Frame Size – 48
- Wet End Type – Centre Discharge
- Length: 205 mm Height: 170mm Width: 143mm
- Commonly used with:This is the Gecko / Aquaflo factory original wet end which is usually fitted to a Emerson motor, the wet end sometimes has a code on 91040840.
$114.01
Aqua-Flo CMHP Wet End Assembly
Complete replacement Aqua-Flo CMHP Wet End Assembly, designed specifically for use with Hot Tubs and Spas. This Hi-flo 1HP rated side discharge wet end is the correct replacement for Aqua-flo’s 1/15hp Circmaster circulation pump. The side discharge model is the most common sold in europe.
- Plumbing connections: 1.5 inch unions.
- Wet End Frame Size – 48
- Wet End Type – Centre Discharge
- Wet End Horsepower: 1HP
- Length: 205 mm Height: 170 mm Width: 143mm
- Commonly used with: Aqua-flo Flo-Master CP centre discharge hot tub pump range. Fits 1 ½” unions. This is also an ideal replacement wet end for the Waterway centre discharge pump.
$32.08
Aqua-Flo FM XP2 2HP Impeller
Genuine replacement 2hp impeller for the Aqua-flo Flo-master XP2 pump wet ends designed specifically for use with Hot Tubs & Spas. These 2hp impellers will ONLY fit the XP2 pump wet ends and you should fit the same horsepower equivalent. The horsepower rating can be identified by the vein gap distance.
- Impeller HP – 2hp
- Vein Gap Distance – 6mm
- Intake Outer Diameter – 53mm
- Diameter – 110mm
- Length – 80mm
- Colour Dot ID – Blue/Blue
$32.08
Aqua-Flo FM XP2 3HP Impeller
Genuine replacement 3hp impeller for the Aqua-flo Flomaster XP2 pump wet ends designed specifically for use with Hot Tubs & Spas. These 3hp impellers are the most common in Europe and will ONLY fit the XP2 pump wet ends, you should always fit the same horsepower equivalent. The horsepower rating can be identified by the vein gap distance.
- Impeller HP – 3hp
- Vein Gap Distance – 11mm
- Intake Outer Diameter – 53mm
- Diameter – 110mm
- Length – 80mm
- Colour Dot ID – Green/Green
