- HomeProducts tagged “1 Speed”
$385.67
Balboa HA440NG Spa Pump – 1 ½HP – 1 Speed – 79mm Centre Suction x 79mm Side Discharge
The Balboa HA440NG Spa Pump – 1 ½HP – 1 Speed MPN -1023063 is the ultimate benchmark in design, performance & flexibility, directly replaces failed Spaform hot tub pumps.
- Power reference: 1.5 HP 1 speed
- Volts: 230
- Hz: 50
- Wet End Impellor HP: 1.5
- RPM Low / High: 2900
- Amps Draw:5.6 A
- Frame Size: 48F
- Plumbing connections: 2-inch suction and discharge ports
- Electrical connections: Supplied with a 3-core cable and AMP plug
- Length: 390 mm Height: 230 mm Depth: 190 mm
- Commonly used with: This Pump is the replacement for the original HA440 Commonly Found On the Spaform Spas. It’s also the direct replacement for the discontinued GC150 with the blue wet end. It is not a straight swap for the GC150 as there are a few plumbing changes needed. This pump will perform at its best with 2-inch plumbing. This pump does not always perform at its best when plumbed into 1.5-inch plumbing combined with running through a water diverter valve.
$475.30
Waterway 1 Speed 2.0HP 56 Frame Pump 2.5 X 2
The larger 56 frame pumps use a more robust heavy duty motor and are favoured by spa manufacturers.
93mm Centre Suction x 79mm Side Discharge
- MPN: PF201N22X25
- Power reference: 2 HP 1 speed
- Volts: 230
- Hz: 50
- Amps Low / High Speed: 2 / 9.5
- RPM : 2800
- Wet end impellor HP: 4
- Capacitor : 30 uf
- Plumbing connections: 2.5 x 2 inch Waterway unions.
- Electrical connections: No wire with pump, you will need to use your existing wire. 2 x live, 1 x neutral and 1 x earth.
- Length: 430 mm Height: 240 mm Depth: 200 mm
- Commonly used with: Hot Tubs Direct, Knightswood Leisure, Touch Spas, Catalina, Clearwater Spas, Hydropool, Hotspring, Hotspot, Southwest Spas and many more
$475.30
Waterway 1 Speed 2.0HP 56 Frame Pump 2 X 2
The larger 56 frame pumps use a more robust heavy duty motor and are favoured by spa manufacturers.
93mm Centre Suction x 79mm Side Discharge
- MPN: PF201N22X
- Power reference: 2 HP 1 speed
- Volts: 230
- Hz: 50
- Amps Low / High Speed: 2 / 9.5
- RPM : 2800
- Wet end impellor HP: 4
- Capacitor : 30 uf
- Plumbing connections: 2 x 2 inch Waterway unions.
- Electrical connections: No wire with pump, you will need to use your existing wire. 2 x live, 1 x neutral and 1 x earth.
- Length: 430 mm Height: 240 mm Depth: 200 mm
- Commonly used with: Hot Tubs Direct, Knightswood Leisure, Touch Spas, Catalina, Clearwater Spas, Hydropool, Hotspring, Hotspot, Southwest Spas and many more
$471.60
Waterway 1 Speed 3HP 56 Frame Pump 2 X 2
This pump can be found in many different Hot Tubs in various forms. It has 2-inch outlets and will work in place of either Waterway, Vico, Sta-Rite, GE, Emerson, A.O Smith, ITTor Aqua-flo and in most cases the unions will wind straight on. This pump is used for the boost jets operation.
- MPN:PF-30-1N22X
- Power reference: 3.0 HP 1 speed
- Volts: 230
- Hz: 50
- Motor HP Low / High: 3.21
- Amps Low / High Speed: 1.8/9
- RPM Low / High: 12.3/12.8
- Wet end impellor HP: 5
- Capacitor Low / High: 36 uf
- Plumbing connections: 2 x 2 inch Waterway unions.
- Electrical connections: No wire with pump, you will need to use your existing wire. 2 x live, 1 x neutral and 1 x earth.
- Length: 430 mm Height: 240 mm Depth: 200 mm
- Commonly used with: Hot Tubs Direct, Knightswood Leisure, Touch Spas, Catalina, Clearwater Spas, Hydropool, Hotspring, Hotspot, Southwest Spas and many more
