- HomeProducts tagged “1.5HP”
$534.00
Aqua-Flo by Gecko XP2e 1.5HP 2 Speed Pump (2×2)
The Aqua-Flo by Gecko XP2e 1.5 HP 2 Speed Pump is designed for high-flow spa applications, enhancing water circulation and jet performance.
- Power reference: 2.5 HP 2 speed MPN 05320024-8040
- Power: :Volts: 230
- Hz: 50
- Motor HP Low / High: 1.5
- Amps Low / High Speed: 1.6 / 6.7
- RPM Low / High: 1440 /2840
- Capacitor Low / High: 16 / 25
- Plumbing connections: 2 x 2 inch unions
- Electrical connections: 1 x 4 core JJ lead
- Length: 379 mm Height: 232 mm Depth: 203 mm
- Commonly used with: This pump can be used on a variety of Spas.
$385.67
Balboa HA440NG Spa Pump – 1 ½HP – 1 Speed – 79mm Centre Suction x 79mm Side Discharge
The Balboa HA440NG Spa Pump – 1 ½HP – 1 Speed MPN -1023063 is the ultimate benchmark in design, performance & flexibility, directly replaces failed Spaform hot tub pumps.
- Power reference: 1.5 HP 1 speed
- Volts: 230
- Hz: 50
- Wet End Impellor HP: 1.5
- RPM Low / High: 2900
- Amps Draw:5.6 A
- Frame Size: 48F
- Plumbing connections: 2-inch suction and discharge ports
- Electrical connections: Supplied with a 3-core cable and AMP plug
- Length: 390 mm Height: 230 mm Depth: 190 mm
- Commonly used with: This Pump is the replacement for the original HA440 Commonly Found On the Spaform Spas. It’s also the direct replacement for the discontinued GC150 with the blue wet end. It is not a straight swap for the GC150 as there are a few plumbing changes needed. This pump will perform at its best with 2-inch plumbing. This pump does not always perform at its best when plumbed into 1.5-inch plumbing combined with running through a water diverter valve.
$455.44
Balboa HA440NG Spa Pump – 1 ½HP – 2 Speed 79mm Centre Suction x 79mm Side Discharge
The Balboa HA440NG Spa Pump – 1 ½HP – 2 Speed MPN -1023024 is the ultimate benchmark in design, performance & flexibility, directly replaces failed Spaform hot tub pumps.
- Power reference: 1.5 HP 1 speed
- Volts: 230
- Hz: 50
- Wet End Impellor HP: 1.5
- RPM Low / High:2900 / 1450
- Amps Draw: 5.7 / 1.5 A
- Frame Size: 48F
- Plumbing connections: 2-inch suction and discharge ports
- Electrical connections: Supplied with a 4-core cable and AMP plug
- Length: 390 mm Height: 230 mm Depth: 190 mm
- Commonly used with: Serves as a direct replacement for older HA440 Magnaflow models, commonly found in Spaform hot tubs.
$166.20
LX TDA150 Pump Single Speed 1.5HP
The LX TDA150 has a low positioned centre suction port enables the pump to self-drain once the motor is shut off.
- Volts: 230
- Hz: 50
- Motor HP Low / High: 1.5
- Amp Draw: 5.8
- RPM Low/High: 2900
- Capacitor: 20 µF
- Plumbing connections: 1.5 inch
- Electrical connections: 3 Core AMP
- Length: 400 mm Height: 205 mm Depth: 175 mm
- Commonly used with: MAAX, Cascade, Trinity, Monalisa and AMC Winer along with many other newer spa brands appearing in the European market.
