- HomeBalboa/Vico/Starite Wet End
$76.79
Balboa Wet End 2.0HP Vico Ultimax Niagara
This wet end is from Balboa Water Group. The item is formerly known as a Vico wet end now known as a Ultimax / Niagara wet end and includes Internally factory fitted seal, the housing, the face plate, the face plate o-ring, and the impeller.
- Plumbing connections: 2 inches
- Wet End Horsepower: 2HP
- Length: 195 mm Height: 150 mm Width: 168mm
- Commonly used with: This unit is very similar in appearance to the Vico Ultima / Ultrajet wet end used on Hydropool and Canadian Spas but the outlets and overall size of the wet end are slightly different. Must on be fitted to Vico Ultimax pumps or Balboa Niagara pumps. This unit is to fit on frame size 90 which is a similar size to the industry standard 56 frame sizing.
$76.79
Balboa Wet End 3.0HP Vico Ultimax Niagara
This wet end is from Balboa Water Group. The item is formerly known as a Vico wet end now known as a Ultimax / Niagara wet end and includes Internally factory fitted seal, the housing, the face plate, the face plate o-ring, and the impeller.
- Plumbing connections: 2 inches
- Wet End Horsepower: 3HP
- Length: 195 mm Height: 150 mm Width: 168mm
- Commonly used with: This unit is very similar in appearance to the Vico Ultima / Ultrajet wet end used on Hydropool and Canadian Spas but the outlets and overall size of the wet end are slightly different. Must on be fitted to Vico Ultimax pumps or Balboa Niagara pumps. This unit is to fit on frame size 90 which is a similar size to the industry standard 56 frame sizing.
$95.62
Wet End 2.0HP Vico Ultrajet (Ultima)
Complete replacement Vico Ultrajet wet end with 2hp rated internal impeller and designed specifically for use with Hot Tubs and Spas. Vico is a pump manufacturing sub-brand of Balboa Water Group, Vico manufactured the now discontinued Ultrajet spa pump for Balboa many years ago. These distinctive shaped Ultrajet wet ends are the genuine replacement part from Vico and are still obtainable to us from Balboa.
- Plumbing connections: 2 x 2 inch unions.
- Wet End Frame Size – 48
- Wet End Type – Side Discharge
- Wet End Horsepower: 2HP
- Length: 190 mm Height: 160 mm Width: 140mm
- Commonly used with: This exact wet end can be found on very old spas by brands such as Canadian Spa, Hydropool Hot Tubs, Can Spa, Coast Mountain and others.
$86.14
Wet End 3.0HP Vico Ultrajet (Ultima)
Complete replacement Vico Ultrajet wet end with 3hp rated internal impeller and designed specifically for use with Hot Tubs and Spas. Vico is a pump manufacturing sub-brand of Balboa Water Group, Vico manufactured the now discontinued Ultrajet spa pump for Balboa many years ago. These distinctive shaped Ultrajet wet ends are the genuine replacement part from Vico and are still obtainable to us from Balboa.
- Plumbing connections: 2 x 2 inch unions.
- Wet End Frame Size – 48
- Wet End Type – Side Discharge
- Wet End Horsepower: 3HP
- Length: 190 mm Height: 160 mm Width: 140mm
- Commonly used with: This exact wet end can be found on very old spas by brands such as Canadian Spa, Hydropool Hot Tubs, Can Spa, Coast Mountain and others.
$87.78
Wet End for 1.5HP Sta-Rite (HA440NG)
Complete replacement Balboa HA440NG spa pump wet end with 1.5hp rated internal impeller and designed specifically for use with Hot Tubs and Spas. The HA440NG wet end is manufactured by Sta-Rite for the Balboa Water Group.
This wet end must be bolted onto a Balboa motor only, it requires a Balboa motor as they have a long motor shaft length for the mechanical seal to work correctly.
- Plumbing connections: 2 inches
- Wet End Horsepower: 1.5HP
- Length: 195 mm Height: 150 mm Width: 165mm
- Commonly used with: This wet end is used on our HA440NG pumps but is also the same wet end used when the pump was called Sta-Rite and often labelled up as 1.0HP found on Master Spas in the past.
$96.20
Wet End for 2HP Durajet (Cascade)
Complete replacement Sta-Rite (Balboa) Durajet spa pump wet end with 2hp rated internal impeller and designed specifically for use with Hot Tubs and Spas. This wet end is very distinctive and can be easily recognised by having fins in the front volute face. The Sta-Rite Durajet pump made by Pentair was discontinued some time ago now but these genuine original wet ends along with the complete pumps have now been re-manufactured by Balboa.
- Plumbing connections: 2 x 2 inch unions.
- Wet End Frame Size – 48 or 56
- Wet End Type – Side Discharge
- Wet End Horsepower: 2HP
- Length: 190 mm Height: 188 mm Width: 130mm
- Commonly used with:This exact wet end can be found on USA spa brands such as Dimension One Spas, Master Spas, HotSprings & others.
