- HomeBalboa Pumps
$169.08
Balboa HA350 Whirlpool Bath Pump – 0.55kW
The Balboa (HydroAir) HA350 Self Drain – Pneumatic pump MPN 22-35321 is our most popular selling bath pump.
- Volts:230
- Hz:50
- RPM Low / High: 2850
- Amps Low / High Speed: 3.1 A
- Plumbing connections: 1.5 inch unions
- Electrical connections: Comes with plain cable attached
- Length: 361 mm Height: 175 mm Depth: 132 mm
- Commonly used with: Larger whirlpool bath settings and also some smaller Hot Tubs or Spas.
$385.67
Balboa HA440NG Spa Pump – 1 ½HP – 1 Speed – 79mm Centre Suction x 79mm Side Discharge
The Balboa HA440NG Spa Pump – 1 ½HP – 1 Speed MPN -1023063 is the ultimate benchmark in design, performance & flexibility, directly replaces failed Spaform hot tub pumps.
- Power reference: 1.5 HP 1 speed
- Volts: 230
- Hz: 50
- Wet End Impellor HP: 1.5
- RPM Low / High: 2900
- Amps Draw:5.6 A
- Frame Size: 48F
- Plumbing connections: 2-inch suction and discharge ports
- Electrical connections: Supplied with a 3-core cable and AMP plug
- Length: 390 mm Height: 230 mm Depth: 190 mm
- Commonly used with: This Pump is the replacement for the original HA440 Commonly Found On the Spaform Spas. It’s also the direct replacement for the discontinued GC150 with the blue wet end. It is not a straight swap for the GC150 as there are a few plumbing changes needed. This pump will perform at its best with 2-inch plumbing. This pump does not always perform at its best when plumbed into 1.5-inch plumbing combined with running through a water diverter valve.
$455.44
Balboa HA440NG Spa Pump – 1 ½HP – 2 Speed 79mm Centre Suction x 79mm Side Discharge
The Balboa HA440NG Spa Pump – 1 ½HP – 2 Speed MPN -1023024 is the ultimate benchmark in design, performance & flexibility, directly replaces failed Spaform hot tub pumps.
- Power reference: 1.5 HP 1 speed
- Volts: 230
- Hz: 50
- Wet End Impellor HP: 1.5
- RPM Low / High:2900 / 1450
- Amps Draw: 5.7 / 1.5 A
- Frame Size: 48F
- Plumbing connections: 2-inch suction and discharge ports
- Electrical connections: Supplied with a 4-core cable and AMP plug
- Length: 390 mm Height: 230 mm Depth: 190 mm
- Commonly used with: Serves as a direct replacement for older HA440 Magnaflow models, commonly found in Spaform hot tubs.
$530.09
Balboa Niagara Ultimax 2HP 1spd Pump
The Balboa Niagara 2 HP Single-Speed Pump MPN 1023321 is a reliable and efficient solution for spa systems.
- Power reference: 2.0 HP 1 speed
- Volts: 230
- Hz: 50
- Frame Size: 56F
- Wet End Impellor HP: 2
- Amp Draw:8.7 A
- Plumbing connections: 2”
- Electrical connections: 3 core AMP
- Length: 459 mm Height: 203 mm Depth: 203 mm
- Commonly used with: Direct replacement for Vico Ultrajet, Ultimax, and Sta-Rite pumps and is commonly used in spa brands such as Hydropool, Canadian Spa, Master Spa, Elite Spas, and Dimension One.
$550.00
Balboa Niagara Ultimax 2HP 2 Speed Pump
The Balboa Niagara 3 HP 2 Speed Pump MPN 1023322 is a reliable and efficient solution for spa systems.
- Power reference: 2.0 HP 2 speed
- Volts: 230
- Hz: 50
- Frame Size: 56F
- Wet End Impellor HP: 2
- Amp Draw: 9.0 / 1.9 A
- Plumbing connections: 2”
- Electrical connections: 4 core AMP
- Length: 459 mm Height: 203 mm Depth: 203 mm
- Commonly used with: Direct replacement for Vico Ultrajet, Ultimax, and Sta-Rite pumps and is commonly used in spa brands such as Hydropool, Canadian Spa, Master Spa, Elite Spas, and Dimension One.
$550.90
Balboa Niagara Ultimax 3HP 1 Speed Pump
The Balboa Niagara 3 HP Single-Speed Pump MPN 1023331 is a reliable and efficient solution for spa systems.
- Power reference: 3.0 HP 1 speed
- Volts: 230
- Hz: 50
- Frame Size: 56F
- Wet End Impellor HP: 2
- Amp Draw: 11.5 A
- Plumbing connections: 2”
- Electrical connections: 3 core AMP
- Length: 459 mm Height: 203 mm Depth: 203 mm
- Commonly used with: Direct replacement for Vico Ultrajet, Ultimax, and Sta-Rite pumps and is commonly used in spa brands such as Hydropool, Canadian Spa, Master Spa, Elite Spas, and Dimension One.
$598.80
Balboa Niagara Ultimax 3HP 2 Speed Pump
The Balboa Niagara 3 HP 2 Speed Pump MPN 1023332 is a reliable and efficient solution for spa systems.
- Power reference: 3.0 HP 2 speed
- Volts: 230
- Hz: 50
- Frame Size: 56F
- Wet End Impellor HP: 2
- Amp Draw:11.5 / 2.5 A
- Plumbing connections: 2”
- Electrical connections: 4 core AMP
- Length: 459 mm Height: 203 mm Depth: 203 mm
- Commonly used with: Direct replacement for Vico Ultrajet, Ultimax, and Sta-Rite pumps and is commonly used in spa brands such as Hydropool, Canadian Spa, Master Spa, Elite Spas, and Dimension One.
$404.50
Balboa/Pentair Durajet 2.0 HP 1 SPD Pump
The Balboa durajet 2.0 HP 1 speed pump is manufactured by Balboa with the help of a Pentair wet end. This pump can be found in many hot tubs including Hotsprings.
- Power reference: 2.0 HP 1 speed
- Volts:230
- Hz:50
- RPM Low / High: 2800
- Wet End Impellor HP: 2.0
- Amps Low / High Speed: 8.7
- Plumbing connections: 2 inch unions
- Electrical connections: 1 x 3 core cable (not supplied)
- Length: 380 mm Height: 220.72 mm Depth: 165.10 mm
- Commonly used with: This pump can be found in many hot tubs including Hotsprings
$629.21
Balboa/Pentair Durajet 2.0 HP 2 SPD Pump
Genuine modern replacement 2hp 2 speed Balboa Durajet pump designed specifically for use with hot tubs and spas. This Durajet pump also known as the Cascades is manufactured by Balboa. Balboa has many pump divisions and owns Pentair who manufacture the Sta-Rite range of pumps.
- Power reference: 2.0 HP 2 speed
- Volts:230
- Hz:50
- RPM Low / High: 1400/2800
- Wet End Impellor HP: 2.0
- Amps Low / High Speed: 1.9/9.0
- Plumbing connections: 2-inch unions
- Electrical connections: 1 x 4 core cable (not supplied)
- Length: 437.64 mm Height: 220.72 mm Depth: 165.10 mm
- Commonly used with: Dimension One Spas, Hotsprings & Master Spas.
$292.21
Perseus 460 Whirlpool Pump
Complete replacement Hydroair Perseus HA460 pump designed specifically for use with spas, hot tubs and whirlpool baths. This compact high-performance pump from Hydroair delivers a high flow output for its size, silent running and comes complete with a built-in pneumatic air switch for use with whirlpool bath applications.
- Power reference: 1.6 HP
- Volts: 230
- Hz: 50
- Motor HP Low / High: 1.61
- Wet End Impellor HP: 1.5
- RPM Low / High: 2800
- Amps Low / High Speed: 6.2
- Plumbing connections: 1.5 inch
- Electrical connections: Comes with plain cable attached
- Length: 335 mm Height: 210 mm Depth: 175 mm
- Commonly used with:Larger whirlpool bath settings and also some smaller Hot Tubs or Spas.
